◆Auto negotiation function allows UTP port to auto select 10M or 100M, and Full Duplex or Half Duplex.
◆ UTP port supports auto MDI-MDIX function.
◆Supports link fault pass through (LFP) function: When optical fiber or UTP is at
fault, the converter could stop all the link, in addition to power light, other LED will be off.
◆Multiple Optical Transceiver could be chosen: SC,ST or FC, singlemode or multimode, single
fiber or double fiber.
◆Supports 1600 bytes packet.
◆Converter working mode could be chosen: Store andforward mode, modified cut
through mode, or
◆Internal IC of prevented thunderbolt could greatly reduce damage of the converter
caused by thunderbolt induction.
◆ Internal or External switching power: for users to choose.
◆Operating standards：IEEE802.3u、10/100Base-TX and 100Base-FX；
◆MAC addresses table: 1K
◆Data buffer: Built-in 128Kb RAM .
◆Connectors: UTP Connector: RJ-45, 10/100Mbps; Fiber Connector: ST/SC/FC, 100Mbps
◆Cable: UTP: Cat. 5 (the max distance up to 100m)
Multimode Fiber: 50/125, 62.5/125μm（the max distance up to 2km or 5km）
Singlemode Fiber: 8/125, 8.7/125, 9/125, 10/125μm（the max distance up to 20 -120km）
◆Flow Control: Full Duplex: Supporting standard IEEE802.3x
Half Duplex: back pressure
◆LED: Power, FX SD, FX Link/Act, TX 100, TX FDX, TX Link/Act.
◆Power Requirement: AC 100～ 240V, 50-60Hz; DC 5V, 1A.
◆Ambient temperature: 0～50℃；Storage temperature：-20℃～ 70℃
◆Humidity: 5%～ 90%
◆Dimensions: Internal power: 30×110×140mm; External power: 26×70×93mm